Timber Construction Details
HO12+
The HO12+ program is suitable for the structural calculation and design of notches (solid timber and glulam) and openings (glulam) in timber beams.
The user must enter the internal forces and dimensions required for the verifications. The resisting tensile force, the residual cross-section and the reinforcement are verified.
Discover now more programs from the section Timber & Roof!
SHOW MOREMaterial
- Glulam
- Softwood (only with a notch)
- Hardwood (only with a notch)
Structural system
Notches:
- with/without reinforcement
- notch on top or bottom
- optionally with a haunch
Beam openings
- with/without reinforcement
Loads
- The design value of the shear force or the support reaction
Fasteners/Reinforcement
- Butt straps
- Glued-in threaded rods
- Fully threaded screws
- SPAX screws
Verifications of beams with notches
The verifications for beams with bottom notches, either with or without reinforcing butt straps of veneer plywood or for laminated timber beams, chamfered or notched on top, are performed according to the relevant standard.
In addition to the reinforcements provided by the standard, glued-in threaded rods and self-tapping fully threaded screws (Spax screws / Z.9.1-519) are available. The Spax screws have a diameter of 8, 10 or 12 mm and a length between 200 and 600 mm.
Verifications of beams with openings
Due to the changes in the cross-section of the beam, transverse tensile stresses act at the points of discontinuity and might cause cracks in the timber beam. Thanks to the direct input of the system, the loading and the cross-sections, the user can quickly and easily verify notches or openings and design possibly required reinforcements.
Round or rectangular openings with or without reinforcement are verified.
Document file formats
- Word
- Printer
Output
The output is pre-set.
Timber construction
- DIN EN 1995
- ÖNORM EN 1995
Support resources
News
Role model baues + partner – Multi-layered and progressive BIM planning
BIM is not software, but a planning method: this is demonstrated by the ultra-modern multifunctional building that will be built on the Gottschall + Sohn KG company premises.
“FRILO means precise and efficient work to me”
By switching to the FRILO Suite, the engineering office BILGER INGENIEURE decided to rely on the FRILO subscription model. The numerous advantages convinced the long-standing customer.